As the capital that can transport through a traffic jam, the motor was such just transportation. But for optimum performance, do not ever ignore motor maintenance.

Here’s a tip to easily maintain the motor:

1. Check the condition of oil, because oil participates an important role to grease the machine components, such as the handlebar piston, piston, and piston rings, axles and noken crutches or handlebar as valve. If the grease oil is colored or blackish and the grease power reduced, it should be replaced with oil according to manufacturer’s recommendations.

2. Check the battery condition. Do not let water through the battery maximum and minimum limits which could result in accelerated damage to the battery cells. Add the battery in the morning. Immediately replace the battery if the battery have started to weaken.

3. Check the chain and gears. Do not let the chain too loose or too tight. Check also the condition of gear, if it is a sharp change soon because otherwise the chain can suddenly broken off.

4. Check the coil cable and sparkplug. Immediately replace the cable that looks old enough and a lot of visible cracks and hardening of the cable. Do not forget to see the presence of spark plug because it is vital for smooth running of a vehicle engine.

5. Watch out the gas hose. Do not let the fuel hose condition occurs hardens or cracks, because the inside of the hose can be elastic and produced dirty powders from hose carried into the carburetor.

6. Heat engine for two minutes. Heat engine before the motor is run in order to lubricating oil circulation throughout the inside of the machine moving.

7. Check your tire pressure. Do not be too hard and also not less because it can cause damage motorcycle’s tires.

8. Always use original spare parts.

Source: http://warungtips.com/tip-merawat-motor.html